The TD-107s is smaller, lighter, and offers a modular remote detection cell that makes maintenance and exchange easy. Pre-calibrated cells are available for simple swap-out by the end-user via plug-and-play connections.
The TD-107s features a IP65 rated enclosure, a bright LED backlit display, and user- friendly control menu for easy operation. It also contains a new computer control module, and a user- accessible micro SD card that captures up to 18 months of onboard trending!
The TD-107s is US Coast Guard approved, IMO Resolution MEPC.107(49) compliant, and is available in 15ppm and 5ppm models.
A powder coated mild steel enclosure houses the monitor electronics including printed circuit boards and power and relay terminals. It is connected to the Smart Sensor assembly with a quick connect cable.
Monitor Terminal Blocks
Located behind enclosure front panel. Power, AC/DC relay, and 4-20mA analog output connections are made on these blocks.
The monitor default is the home screen which displays hydrocarbon concentration readings as well as any active alarms. Users can navigate to other function screens by using the keypad.
The keypad features a common five point navigation star for left, right, up, down, and enter commands. Shortcut keys are provided for main screens & menus.
Smart Sensor Assembly
The Smart Sensor assembly is connected to the monitor enclosure with a quick connect cable. Includes a clear flow cell in a plastic enclosure, sealed optics and electronics, a humidity sensor, and a three-position flush valve.
Three-Position Ball Valve
The valve is attached to the Smart Sensor abd wired to the monitor enclosure. It allows normal processes, flushing, and solution injection by controlling the sample inlet and outlet lines to the Smart Sensor assembly.
Luer-Lok Injection Port
The port on the front of the Smart Sensor used for injecting cleaning solutions with a syringe.
A port located on top of the Smart Sensor assembly permits access to the flow for cleaning with a brush when flushing alone is not effective.
The plumbing connection for attaching the sample intake line to the Smart Sensor assembly.
The plumbing connection for attaching the sample out line to the Smart Sensor assembly.
Flush Line Inlet
The plumbing connection for attaching a clean water line or pump to the Smart Sensor assembly.
Enclosure (w/ mounting bracket)
9.56, 14.25, 5.67 in (242.8, 361.9, 169.4 mm)
14 lbs (6.35 kg)
Powder Coated mild steel
NEMA 4x, IP 66
Inlet/Outlet/ Flush Pipe Size
0.25 in (6.35 mm) stainless steel or plastic tubing.
24 VAC / VDC Optional 100-240 VAC power supply available
Three dry-contact relays:
250 VAC, fused at 2 A
or 28 VDC, fused at 1.6 A
NOTE: Turner Designs Hydrocarbon Instruments does not recommend placing heavy inductive loads on the relays.
Cables & Cable Glands
Up to four (4) M20 cable glands allow for serial connection of power supply and fieldbus wiring
Actuator housing includes threaded mounting holes
Use IP68 glands for all wires to maintain IP rating
Optimized for fieldbus installation (refer to installation manual for specific requirements) Circular MIL connectors for power/control/configuration
Digital: 2x digital input (Open & Close)
3x digital output (Open, Closed & Alarm)
CANopen Fieldbus: Max. 127 nodes/network, allows positioning and other extended controls.
Network Valve-Position Sensor
Absolute position sensor; provides correct feedback even after power failure.
5.84° - Maximum 16 turns
USB connection to PC with Eltorque Manager v.3
Open & Closed Postions
Speed, torque, valve postion, valve seat region postion.
Inverted I/O or fieldbus parameters depending on control interface.
Emergency & Safety
Ergonomic hand wheel
Mechanical valve postion indicator
Status LED when actuator is powered
*Safety funtion disables motor if actuator is operated
manually while powered.
NAG Marine's mission is to provide best-in-class products and technical representative services to our highly valued customers. We focus on technological solutions to difficult problems in the Fluid Automation and Shipboard Computer markets.
2511 Walmer Ave
Norfolk, Virginia, 23322
United States of America