MT-150 Electric Valve Actuator
from Eltorque
You are here:
MT-150
Multi-turn Electric Valve Actuator
NAG Marine MT Series electric valve actuators offer a high level of precision valve control. They are an ideal solution for requirements demanding accurate flow control, easy installation and low cost operation.
NAG Marine MT Series electric valve actuators are designed to be maintenance free, and feature completely enclosed, permanently lubricated transmissions to ensure extended reliable service in the harshest operating conditions.
More
About MT-150
Features
Downloads
- Precise multi-turn control for gate and globe valves
- 150 Nm max torque
- IP68 aluminum housing
- Easy installation/retrofit
- User-configurable torque, closing time, & position
- Permanently lubricated
- Low power consumption
- Manual emergency override
+ Technical Specifications
Torque 37-111 ft/lbs (150 Nm max.) Valve Stem Speed 5-15 RPM Valve Applications 4 - 6 inch multi-turn valves (typical) Closing Time Configurable using software Configuration Manager v.3 Mechanical Dimensions (H x W x D) 22 x 6 x 11-in. (558.8 x 152.4 x 279.4-mm) Weight 104 lbs. (47 Kg) Housing Stainless steel Operating Temp -13° to 131°F (-25° to 55°C) Over Temp Protection Motor current turned off Under Temp Protection Stator coils maintain internal temperature Electrical Supply Voltage 110-240V AC (single phase) 50-60Hz or
440-460V AC (3 phase) 50-60hzPower Consumption Max: 240W/560 VA, Standby: 14W Connectors Power MIL-DTEL-5015 series
75-474214-02P, 4-pin connector
Actuator housing includes threaded mounting holes
Optimized for fieldbus installation (refer to intstallation manual for specific requirements)Control Interface Analog Version Close signal: 20Ma
Open signal: 4Ma
Local remote control: Indicator on actual control panel
Master alarm with current output for control system
Valve position feedback: isolated 4-20Ma, external 24V DC required
Local control panel stop button with integrated indicatorDigital Version Close signal: dry contacts
Open signal: dry contacts
Open indicator output: dry contacts
Close indicator output: dry contacts
Valve position feedback: isolated 4-20Ma, external 24V DC required
Valve travel indication: both open and close indicator lights lit during travel
Local/Remote control: integrated indicator light on actuator
Local stop button: integrated indicator light on actuator Summary alarm output, dry contacts provided
Valve Position Sensor Absolute position sensor, provides correct feedback even after power failure Resolution 5.84° - Maximum 16 turns Configuration & Set-Up USB connection to PC with software Configuration Manager v.3 Configurable Parameters Valve type
Open & Closed positions
Speed, torque, valve position, valve seat region position
Inverted I/O or fieldbus parameters depending on control interfaceEmergency & Safety Manual Operation Ergonomic hand wheel, mechanical valve-position indicator, status LED when actuator is powered
Safety function disables motor if actuator is operated manually while poweredAppx. Turns
Closed-Open4 inch valve - 60
5 inch valve - 70
6 inch valve - 80Type Approvals DNV, GL, CCS, ABS, (Product Design Assesment-PDA), BV & LR
Markings CE marked
Solutions
NAG Marine is the exclusive provider of the VEGA Americas line of tank level indicators (TLI) for all shipboard measurement applications.
NAG Marine provides a line of rugged marine embedded PCs, military operator interface panels, and high-bright sunlight readable displays.
NAG Marine has exclusive agreements to sell, service, and install the Turner Designs Hydrocarbon Instruments UV Fluorescence monitors to commercial marine markets in the United States.